Click here for a printable version of this article.

Automatic Sprinklers and High-Volume Low Speed Fans - What to Do?

HVLS fans were originally used in Australia in the dairy industry to help keep humidity low for the cattle. When the original design was introduced in Australia, it was mandatory for the HVLS fans to be interlocked by a Very Early Smoke Detection Alarm (VESDA) system for early fan shutdown.

When the fan made it over to the USA it was perceived as a very "green" way to cool a warehouse or plant. The "green" folks liked the design because the fans could be run on a 1 HP motor and can provide a huge amount of air circulation for a very cheap energy cost. The problem is, the VESDA technology was not part of the original design in the USA.

What is a HVLS Fan? The fans typically have 4 - 12 blades that are between 6 ft. and 24 ft. in diameter. They are usually run at speeds, between is 24 and 66 rpm. It takes up to 10 minutes to shut one fan down. A fan running at 66 rpm with 24 ft. diameter blades displaces 370,000 cfm (175m3/s).

As fire protection engineers, we can see a major problem because the HVLS fan can negatively impact the automatic sprinkler operation during a fire. In fact some Fire Marshalls have outlawed HVLS fans from being installed in any of their towns. A Fire Marshall in a town close to our main office in northern Bergen County, NJ will not allow HVLS fans to be installed. This particular town has a significant number of warehouses and supports one of the largest seaports in the USA.

Over the past five years there have been many studies conducted by Schirmer Engineering (now Aon Risk Services) Zurich Insurance, CNA Insurance, XL Insurance and others, all with varying differences. Below are two examples of test results that were conducted where the fans were not interlocked:

Fire Test 1

Fire Test 2

FM Global conducted a burn test at its Test Center in Rhode Island and published its findings on January 2011. The test was conducted in conjunction with Property Research Group (PIRG) and was directed through the National Fire Protection Association (NFPA). The Technical Report was called, Impact of a High Volume Low Speed Fan on Sprinkler Performance on Rack Storage Fires.

The HVLS fan had 6 blades, a fan diameter of 24 ft. and operated at 66 rpm, which displaced 370,000 cfm. There was a 10 ft. clearance between the top of the storage array. The test results concluded that automatic sprinkler systems would fail to control a fire if the fan was not shut down within 90 seconds of the activation of the first automatic sprinkler.

There are two design areas for HVLS fans and automatic sprinkler systems that need to be carefully checked. They apply to both for storage and non-storage occupancies:

Risk Logic, Inc. can help you determine the best approach to shut down HVLS fans as improper shutdown can result in a total loss at your facility. Please contact us for additional information